dmesg - Intel Xeon X3350
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-58-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #97-Ubuntu SMP Wed Jul 8 02:56:15 UTC 2015 (Ubuntu 3.13.0-58.97-generic 3.13.11-ckt22)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. EX38-DS4/EX38-DS4, BIOS F3 02/27/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 base 130000000 mask FF0000000 uncachable
5 base 0CFF00000 mask FFFF00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 3328MB, range: 256MB, type UC
reg 3, base: 4GB, range: 1GB, type WB
reg 4, base: 4864MB, range: 256MB, type UC
reg 5, base: 3327MB, range: 1MB, type UC
total RAM covered: 4095M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4608MB, range: 256MB, type WB
e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5470-0x000f547f] mapped at [ffff8800000f5470]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[mem 0x12c000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x12bffffff]
[mem 0x100000000-0x12bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfedffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfedffff] page 4k
RAMDISK: [mem 0x35b4e000-0x36d9efff]
ACPI: RSDP 00000000000f6e60 000014 (v00 GBT )
ACPI: RSDT 00000000cfee3040 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 00000000cfee30c0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 00000000cfee3180 004C2E (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS 00000000cfee0000 000040
ACPI: HPET 00000000cfee7f00 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 00000000cfee7f80 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: APIC 00000000cfee7e00 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 00000000cfee8000 00015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000cfee85b0 000324 (v01 PmRef CpuPm 00003000 INTL 20040311)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcfedffff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048189
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13244 pages used for memmap
DMA32 zone: 847584 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 196608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xe4000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s81536 r8192 d20864 u524288
pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031788
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4025324K/4192756K available (7393K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 167432K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2666.288 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.57 BogoMIPS (lpj=10665152)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28586 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X3350 @ 2.66GHz (fam: 06, model: 17, stepping: 07)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21330.30 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 8:46:49, date: 04/16/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 00000000cfee8400 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000cfee8490 000087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311)
ACPI: SSDT 00000000cfee8520 000087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [8086:29e0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29e1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:29e9] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xe000-0xe01f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xe100-0xe11f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xe200-0xe21f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xe8405000-0xe84053ff]
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xe8400000-0xe8403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xe300-0xe31f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xe400-0xe41f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xe500-0xe51f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xe8404000-0xe84043ff]
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000400-0x00000403 flags 0x80000000]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xe600-0xe607]
pci 0000:00:1f.2: reg 0x14: [io 0xe700-0xe703]
pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807]
pci 0000:00:1f.2: reg 0x1c: [io 0xe900-0xe903]
pci 0000:00:1f.2: reg 0x20: [io 0xea00-0xea1f]
pci 0000:00:1f.2: reg 0x24: [mem 0xe8406000-0xe84067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xe8407000-0xe84070ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xe5000000-0xe501ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xa000-0xa0ff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xe5020000-0xe5023fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
pci 0000:04:00.0: [197b:2363] type 00 class 0x010185
pci 0000:04:00.0: reg 0x24: [mem 0xe8100000-0xe8101fff]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
pci 0000:04:00.1: reg 0x10: [io 0xb000-0xb007]
pci 0000:04:00.1: reg 0x14: [io 0xb100-0xb103]
pci 0000:04:00.1: reg 0x18: [io 0xb200-0xb207]
pci 0000:04:00.1: reg 0x1c: [io 0xb300-0xb303]
pci 0000:04:00.1: reg 0x20: [io 0xb400-0xb40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xe8100000-0xe81fffff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xe8010000-0xe8010fff 64bit pref]
pci 0000:05:00.0: reg 0x20: [mem 0xe8000000-0xe800ffff 64bit pref]
pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:06:00.0: reg 0x18: [mem 0xe8210000-0xe8210fff 64bit pref]
pci 0000:06:00.0: reg 0x20: [mem 0xe8200000-0xe820ffff 64bit pref]
pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
pci 0000:00:1c.5: bridge window [mem 0xe8200000-0xe82fffff 64bit pref]
pci 0000:07:00.0: [1131:7146] type 00 class 0x048000
pci 0000:07:00.0: reg 0x10: [mem 0xe8305000-0xe83051ff]
pci 0000:07:06.0: [104c:8024] type 00 class 0x0c0010
pci 0000:07:06.0: reg 0x10: [mem 0xe8304000-0xe83047ff]
pci 0000:07:06.0: reg 0x14: [mem 0xe8300000-0xe8303fff]
pci 0000:07:06.0: supports D1 D2
pci 0000:07:06.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe8300000-0xe83fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io 0x0400-0x04bf] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x000d1e00-0x000d3fff] has been reserved
system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0a: [mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x00100000-0xcfedffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xe8500000-0xe86fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xe8700000-0xe88fffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xe8900000-0xe8afffff 64bit pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xe4000000-0xe401ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe5ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.0: bridge window [mem 0xe8500000-0xe86fffff]
pci 0000:00:1c.0: bridge window [mem 0xe8700000-0xe88fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xe8100000-0xe81fffff]
pci 0000:00:1c.3: bridge window [mem 0xe8900000-0xe8afffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xe8020000-0xe802ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xe6000000-0xe6ffffff]
pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe80fffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xe8220000-0xe822ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xe7000000-0xe7ffffff]
pci 0000:00:1c.5: bridge window [mem 0xe8200000-0xe82fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [mem 0xe8300000-0xe83fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe5ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:03: resource 1 [mem 0xe8500000-0xe86fffff]
pci_bus 0000:03: resource 2 [mem 0xe8700000-0xe88fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xe8100000-0xe81fffff]
pci_bus 0000:04: resource 2 [mem 0xe8900000-0xe8afffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xe6000000-0xe6ffffff]
pci_bus 0000:05: resource 2 [mem 0xe8000000-0xe80fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xe7000000-0xe7ffffff]
pci_bus 0000:06: resource 2 [mem 0xe8200000-0xe82fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xe8300000-0xe83fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18756K (ffff880035b4e000 - ffff880036d9f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbee0000-0xcfee0000] (64MB) mapped at [ffff8800cbee0000-ffff8800cfedffff]
microcode: CPU0 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU1 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU2 sig=0x10677, pf=0x10, revision=0x703
microcode: CPU3 sig=0x10677, pf=0x10, revision=0x703
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1460796409.472:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7898
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1400x1050x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 5824k, total 5824k
Console: switching to colour frame buffer device 175x65
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xe8405000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-58-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xe8404000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-58-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-58-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-58-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.13.0-58-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.13.0-58-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.13.0-58-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.13.0-58-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 70a97eeab2625639df8c9979476fd1516dcd650b'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 12:272:776
rtc_cmos 00:03: setting system clock to 2016-04-16 08:46:50 UTC (1460796410)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 788K (ffff88000173b000 - ffff880001800000)
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
systemd-udevd[115]: starting version 204
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16
ata2: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:05:00.0: irq 47 for MSI/MSI-X
r8169 0000:05:00.0 eth0: RTL8168c/8111c at 0xffffc9000067e000, 00:1d:7d:07:fc:64, XID 1c2000c0 IRQ 47
r8169 0000:05:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:06:00.0: irq 48 for MSI/MSI-X
r8169 0000:06:00.0 eth1: RTL8168c/8111c at 0xffffc90004728000, 00:1d:7d:07:fb:e4, XID 1c2000c0 IRQ 48
r8169 0000:06:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406100 irq 46
ata4: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406180 irq 46
ata5: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406200 irq 46
ata6: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406280 irq 46
ata7: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406300 irq 46
ata8: SATA max UDMA/133 abar m2048@0xe8406000 port 0xe8406380 irq 46
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xe8100000 port 0xe8100100 irq 19
ata10: SATA max UDMA/133 abar m8192@0xe8100000 port 0xe8100180 irq 19
firewire_ohci 0000:07:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
usb 4-1: new full-speed USB device number 2 using uhci_hcd
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 4-1: New USB device found, idVendor=046d, idProduct=c52b
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Receiver
usb 4-1: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-1/input2
firewire_core 0000:07:06.0: created device fw0: GUID 00cef11500001a4d, S400
input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input3
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1a.1-1:1
input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/input/input4
logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:1a.1-1:2
tsc: Refined TSC clocksource calibration: 2666.363 MHz
ata3.00: ATA-8: OCZ-VERTEX3, 2.13, max UDMA/133
ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.13 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 < sda5 > sda2
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
random: init urandom read with 41 bits of entropy available
init: plymouth-upstart-bridge main process (192) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (201) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (205) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (206) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 3999740k swap on /dev/sda2. Priority:-1 extents:1 across:3999740k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[325]: starting version 204
lp: driver loaded but no devices found
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
it87: Found IT8718F chip at 0x290, revision 5
it87: VID is disabled (pins used for GPIO)
it87: Beeping is supported
EDAC MC0: Giving out device to module x38_edac controller x38: DEV 0000:00:00.0 (POLLED)
ppdev: user-space parallel port driver
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[drm] Initialized drm 1.1.0 20060810
Linux video capture interface: v2.00
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xA004).
[drm] register mmio base: 0xE5000000
[drm] register mmio size: 131072
ATOM BIOS: SA
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 2023458 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
type=1400 audit(1460789213.276:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=407 comm="apparmor_parser"
type=1400 audit(1460789213.276:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser"
type=1400 audit(1460789213.276:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
type=1400 audit(1460789213.276:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=407 comm="apparmor_parser"
type=1400 audit(1460789213.276:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
type=1400 audit(1460789213.276:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=407 comm="apparmor_parser"
systemd-udevd[347]: renamed network interface eth0 to rename2
saa7146: register extension 'budget_av'
saa7146: found saa7146 @ mem ffffc9000473a000 (revision 1, irq 20) (0x1894,0x0022)
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (KNC1 DVB-C MK3)
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
lp0: using parport0 (interrupt-driven).
hda_intel: position_fix set to 1 for device 1458:a022
snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
adapter failed MAC signature check
encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
SKU: Nid=0x1d sku_cfg=0x4005e601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000005
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Rear Mic=0x18
Front Mic=0x19
Line=0x1a
CD=0x1c
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
gpio_ich: GPIO from 195 to 255 on gpio_ich
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000273000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800c3f48c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800c3f48c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90004b32118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: irq 50 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 6 usecs
budget_av: KNC1-0: MAC addr = 00:09:d6:6d:75:bd
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: failsafe main process (542) killed by TERM signal
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
budget_av 0000:07:00.0: DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
budget_av: ci interface initialised
init: samba-ad-dc main process (638) terminated with status 1
type=1400 audit(1460789213.888:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=746 comm="apparmor_parser"
type=1400 audit(1460789213.888:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=746 comm="apparmor_parser"
type=1400 audit(1460789213.888:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=746 comm="apparmor_parser"
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD1
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
init: cups main process (747) killed by HUP signal
init: cups main process ended, respawning
[drm] fb mappable at 0xD0474000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
r8169 0000:05:00.0 rename2: link down
r8169 0000:05:00.0 rename2: link down
IPv6: ADDRCONF(NETDEV_UP): rename2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): rename2: link is not ready
r8169 0000:06:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
snd_hda_intel 0000:01:00.1: irq 51 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
init: nvidia-prime main process (945) terminated with status 127
random: nonblocking pool is initialized
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x420 offMax=0x1270
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.20 (interface 0x001a0008).
vboxpci: IOMMU not found (not registered)
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:05:00.0 rename2: link up
IPv6: ADDRCONF(NETDEV_CHANGE): rename2: link becomes ready
audit_printk_skb: 153 callbacks suppressed
type=1400 audit(1460789241.120:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2272 comm="apparmor_parser"
type=1400 audit(1460789241.120:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2272 comm="apparmor_parser"
type=1400 audit(1460789241.120:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2272 comm="apparmor_parser"
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
init: systemd-logind main process (625) killed by TERM signal
systemd-udevd[18114]: starting version 204
INFO: NMI handler (perf_event_nmi_handler) took too long to run: 1.116 msecs